INDUSTEX AIR-O-DRY Manual Del Usuario página 4

CONNECTING AND OPERATING THE HOT-AIR MOTOR
Insert the motor air outlet into the inlet sleeve on the nylon structure
and tighten with the strap.
Plug the motor into the mains.
Turn the timer to the right to start the motor.
The timer can be set to a maximum of 180 minutes.
The motor will turn itself off automatically at the end of the set
time.
If your clothing is still not dry, activate the timer to turn the motor
on again for as long as necessary.
STORING YOUR AIR-O-DRY
With the motor turned off, unplug it from the mains and separate
it from the nylon structure by loosening the strap on the inlet
sleeve.
Take the clothing out of the nylon structure and
remove the metal bars.
To fold the nylon structure, first join two opposite
corners together at top and bottom.
We recommend storing it in this position.
Then fold the two sides back on themselves,
thereby obtaining a flat surface.
4
TM
If you need to fold the metal frame further,
hold it by the ends and press towards the
centre while turning the metal frame on its
axis so that it folds up on itself.
Your Air-O-Dry TM will now fit into its carrying
bag.
N.B.: Store your Air-O-Dry TM
metal bars in the right position. We only recommend folding the
Air-O-Dry TM up when you need to fit it into the carrying bag.
CLEANING AND MAINTENANCE
TM
Air-O-Dry does not require any special cleaning or maintenance.
Clean the nylon surface with a damp cloth when necessary.
TECHNICAL FEATURES
Power: 800 W
AC voltage: 230V / 50Hz
WARRANTY
This product is covered by warranty against manufacturing defects,
subject to the time periods stipulated in the legislation in force in
each country.
The warranty does not cover damage resulting from improper
use, negligent commercial use, accidents or mishandling.
ATTENTION
HOW TO DISPOSE OF MATERIALS
This symbol indicates that you must seek information and
follow local regulations regarding the disposal of this kind
of product.
Do not dispose of this product the way you would dispose
of general household waste.
Dispose of this product in accordance with relevant local regulations.
Electrical and electronic products contain hazardous substances
that can harm the environment and human health. They should
be recycled.
flat whenever possible to keep the