Installation Instruction - Gardner Denver Thomas AP-30 Operación Manual

D
o not place anything on the electrical cable.
cables can cause short circuits or electrical shock and must
be repaired by trained service personnel.
D
o not spill water or other liquids over the pump.
W
ork on electrical devices may only be carried out by skilled
personnel in accordance with the applicable engineering
regulations.

Installation Instruction

•
T
he pump is suitable only for operation in dry rooms.
•
T
he pump location should be well ventilated, positioned
horizontally on its mounting feet and should not come in contact
with other objects or installed in an area that is subject to
explosion hazard.
•
E
nsure the pump is placed on a firm base with a suitable slip-free
surface.
•
K
inks or bends in hose can affect pump performance.
diameter should be a minimum equal to pump outlet outer
diameter and its length should not exceed 10m.
•
E
nsure that the supply voltage and frequency corresponds to the
pump label.
•
E
nsure that the pump socket is earthed.
•
E
nsure that the operating air temperature is within the range -
10°C to +40°C and the air humidity does not rise above 90%.
•
T
he diaphragm linear pump is designed for pumping air only.
following media must not be allowed to enter the air intake:
dangerous gas mixtures (e.g. combustible gases, explosive gases
or vapours), water vapour, any liquids, aggressive gases, or traces
of oil or oil mist and grease.
•
P
umps should be operated within specified pressure range only.
P
erformance range specification may be found on series
datasheet on gd-thomas.com.
pressure.
D
o not operate pump at zero
D
amaged
I
nside hose
T
he
3