Plug Receiver - Watts BT-PR02 RF Manual De Instrucciones

CZ
GB
1. Presentation
- The receiver is a plug mounting receiver, specially designed to control
electrical radiator regulation in combination with a wireless thermostat BT-DP02 RF
type.
- This couple (Thermostat Receiver) can also be managed by a Central to
have full control of your heating installation from one point.
- Possibility to use the receiver as On/Off Timer in combination with a
Central unit.
Status LED (RED/Green)
Green: Standby mode
Red: Heating demand (Output on)
OFF:
Off mode
ON/OFF button
Short press: On/Off
RF Configuration button
Short press: Instantaneous RF transmission
3sec press: Thermostat or Central RF init.
15sec press: Reset of the receiver.
2. Technical characteristics
Environment. (Temperatures)
Operating :
shipping et storage :
Power supply
Electrical protection
Output
Maximum Load
Radio Frequency &
RF Receiving distance
EU declaration of conformity
Hereby, Watts Electronics declares
that the equipment is in compliance
with the relevant Community
harmonisation legislation
Product conformed to :
Classification :
Contribution :

Plug Receiver

0°C - 40°C
-10°C to +50°C
230Vac 50Hz by European plug socket
Class II - IP20
Relay 16Amps 250VAC
Up to 16A - 250Vac 50Hz (by European plug socket)
868MHz < 10mW (Bidirectional communication)
Range of approximately 100m in open space.
Range of approximately 30m in residential environment.
Directive 2001/95/EC on General Products Safety
Low voltage directive 2006/95/EEC
Radio Equiment Directive 1995/5/EC-2014/53/EU
ROHS Directive 2011/65/EC
The full text of the EU declaration of conformity is available on
wattswater.eu
UE 811/2013 and 2010/30/UE
IV
(2%)
4
RF LED (Green)
Fixed:
RF configuration.
Flash: RF reception
OFF: Standby
Blink: RF Alarm
Red:
Blink: Timer 2H running
Timer 2H button
Short press: On/Off
(This function will not be fit back
to the BT-DP02 RF thermostat)