Rohr DFC-10P Manual Del Usuario página 5

Controls
Voltage Selection
For models with terminals - the negative wire is hard wired, swap the positive wire to
the desired voltage position.
Amperage Selection
For models with a dial - turn the dial to increase the Amp output. Higher numbers
produce a higher Amperage. For models with a switch - change the switch to alter
the amperage. MIN - trickle charge / MAX - fast charge
Pulse Repair Technology
Older batteries can lose their ability to hold charge due to becoming sulphated. This
charger features highly advanced pulse rectifier boost battery repair technology
that actively repairs this damage. This battery restoration feature can get almost
any battery back to full health.
Mode Icons
For models with both charge and jump start functions - there are two symbols to
indicate the function type:
+ -
+ -
For models with a switch - change
the switch to alter the voltage.
English
Charging mode Jump Start Mode