Instalación De La Placa De Sujeción (Cabeza A Cabeza) - RJG 9204 Manual De Producto

ESPECIFICACIONES DE INSTALACIÓN (continuación)
Drawing Title: 9204-04
INSTALACIÓN DE LA PLACA DE SUJECIÓN (CABEZA A CABEZA)
G
NOTES:
1. CLAMP PLATE APPLICATIONS REQUIRE GUIDED EJECTION
2. EJECTOR AND TRANSFER PIN CONCENTRICITY MUST BE WITHIN 0.030" [0.76] OR
10% OF EJECTOR PIN DIA, WHICHEVER IS SMALLER.
3. ENCLOSED EJECTOR BOX SUGGESTED.
4. DO NOT SCALE PRINT
5. BREAK ALL SHARP EDGES, 0.005 [0.03] R MAX
6. DIMENSIONS IN INCHES [MM], UNLESS NOTED
7. TOLERANCES UNLESS SPECIFIED:
XXX = 0.003 [0.08]
XX = 0.01 [0.3]
ANGLES = 3 30
14 RJG, Inc.
Single-Channel Piezoelectric 12.6 mm Sensor (9204) Installation—Head-to-Head Installation
**CLAMP PLATE INSTALLATIONS FOR PIN ≤ Ø0.25 [7.0]; PINS > Ø0.25 [7.0] USE HEAD-TO-HEAD INSTALLATION.**
G
SECTION G-G
SCALE 1 : 2
Top of Mold
Sensor de Presión de Cavidad Piezoeléctrica Monocanal/Multicanal de 12,6 mm 9204 | Manual del Producto
LP/LX1-M Sensor Adapter
Description: 9204 Sensor
Installation
Drawn: K.J.Brettschneider
Design:
Check: M.Groleau
Date: 09.23.2021