EN-
S.A.S. au capital de 5 000 000 € - Z.I. Les Giranaux - BP71 - 70103 ARC-LÈS-GRAY CEDEX - FRANCE - RCS VESOUL B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090
1
Presentation
m
0 m
4 7
6 mm
Protective foam
2
Fastening the solar panel by Gluing
2.1- Holes in the box and console (WARNING: do not drill either the panel):
Drilling measurements (mm) for panel placed to the left of the box:
470
60
11
Ø16
2.2- Fixing the Panel
1
2
1- Clean the surfaces to be glued with solvent and wipe:
Recommendations:
- Use a solvent containing a mixture of isopopyl alcohol and water (50/50) or a heptane-based solvent.
- Follow all the safety instructions concerning the handling of solvents.
- The ambient temperature when gluing should be between 20°C and 38°C.
- The surfaces to be glued must be dry and clean.
2- Pass the wires of the Panel inside the box (Ø16 hole) with the protective foam.
3- Remove the protective paper from the adhesive.
4- Fix the Panel to the box applying a uniform amount of pressure.
2
SOLAR PANEL
for roller shutters and blinds
ref. 9020626-9020627
By converting solar energy to electrical energy, the solar panel charges the
battery in the AUTOSUN 2 system.
m m
6 0
Technical data:
- Current supplied by the panel (Isc) : 196 mA +/- 10%
- Voltage supplied by the panel (Uoc) : 21V +/- 10%
- Power: 3,2W
- The solar panel should always be placed on the shutter housing so as
to be as exposed as possible to the sun's rays.
- Ensure that the cables are not damaged during installation. Smooth the edges of
all the drilled holes.
- Do not put anything on the solar panel that would filter the sun's ray (e.g.: paint...).
- Keep the photovoltaic cells clean by cleaning them with clean water, using a soft
cloth to avoid scratching them (once a month).
- In winter, do not allow snow to build up on the panels.
- Caution! The cables and connectors must be protected from the roller shutter
movement.
33
4
3
Drilling measurements (mm) for panel placed to the right of the box:
27
5139459A
Read carefully these
instructions before any use.
470
60
4
1
3
2
11
Ø16
1/1