Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-3403, H-3809
LOCKOUT/TAGOUT
WALL MOUNT STATION
TO REMOVE COVER
NOTE: Do not attempt to remove cover in
closed position.
1.
Rotate cover to open position. (See Figure 1)
2. Gently pry one hinge tab out until it releases from
base. (See Figure 2)
3. Repeat on opposite side with second hinge tab.
4. Remove cover.
Figure 1
LO CK OU T ST AT ION
Mount station to wall using four (4) #6 screws
(not included). Be sure screws are long enough to
ensure station is securely mounted to wall. (See Figure 4)
PAGE 1 OF 3
1-800-295-5510
uline.com
ASSEMBLY
TO INSTALL COVER
1.
Place cover in open position. (See Figure 1)
2. Insert hinge tabs. (See Figure 3)
3. Lower cover.
Figure 2
Hinge Tab
INSTALLATION
Figure 4
Para Español, vea página 2.
Pour le français, consulter la page 3.
LO CK OU T ST AT ION
Figure 3
Hinge Tab
LO CK OU T ST AT ION
0615 IH-3403
Publicidad
Resumen de contenidos para Uline H-3403
- Página 1 Para Español, vea página 2. Pour le français, consulter la page 3. H-3403, H-3809 1-800-295-5510 uline.com LOCKOUT/TAGOUT WALL MOUNT STATION LO CK OU T ST AT ION ASSEMBLY TO REMOVE COVER TO INSTALL COVER NOTE: Do not attempt to remove cover in Place cover in open position.
- Página 2 H-3403, H-3809 800-295-5510 uline.mx ESTACIÓN DE BLOQUEO/ ETIQUETADO DE PARED LO CK OU T ST AT ION ENSAMBLE PARA QUITAR LA CUBIERTA PARA INSTALAR LAS CUBIERTA NOTA: No intente quitar la cubierta en la 1. Coloque la cubierta en la posición de abierto.
- Página 3 H-3403, H-3809 1-800-295-5510 uline.ca STATION MURALE DE VERROUILLAGE ET D'ÉTIQUETAGE LO CK OU T ST AT ION MONTAGE POUR RETIRER LE COUVERCLE POUR INSTALLER LE COUVERCLE Placez le couvercle en position ouverte. REMARQUE : Ne tentez pas de retirer le couvercle en position fermée.