Factory Reset; Hold Function; Sensor Maintenance - Thermo Fisher Scientific Elite CTS Manual Del Usuario

Factory Reset

Reset the CTS tester to the factory default by using the factory reset function.
1. Press to enter setup window. Scroll down by pressing the
display shows User Reset and Fact Reset.
2. Scroll down by pressing
3. The display automatically shows No and Yes. Scroll down by pressing
4. Press to confirm either No or Yes. The display shows the Factory Reset option with a
Key Info
Scroll
Accept
EXIT

HOLD Function

This feature helps to freeze the display for a delayed observation.
1. Press button to freeze the measurement.
COND
µs/cm
820
23.5 °C

Sensor Maintenance

1. Always keep the sensors electrodes clean. Rinse the electrodes with de-ionized water and wipe them dry with
clean cloth before storing with its protective cap. For cup type electrodes, remove the white plastic cup and insert
to thoroughly clean viscous solutions. Never scratch electrodes with a hard substance.
2. For better performance, soak the electrode in alcohol for 10 to 15 minutes and rinse with de-ionized water before
starting any measurement process. This is to remove dirt and oil stains on the electrode which may affect the
accuracy of the measurements.
Applications
The Elite CTS tester can be used for the following:
• Agriculture
• Aquaculture
• Aquariums and fish farms
• Boiler blow-down
Warranty
This instrument is supplied with a warranty against manufacturing defects for a period of one year from the date of
purchase.
6
to toggle between the resets. Press
Measure
User Reset
Settings
Fact Reset
Temp Set
Reset
COND
µs/cm
820
23.5 °C
Press to
release
• Drinking water Hydroponics
• Electroplating rinse tanks
• Printing industry
• Swimming pools
to select Reset. Press
to select Fact Reset.
to toggle between No and Yes.
No
Yes
2. Press again to release the measurement.
COND
µs/cm
820
23.5 °C
Press to
release
• Verification of reverse osmosis system operation
• Water and wastewater treatment
• Others
Elite CTS Tester Operating Instructions
to select Reset. The
.
COND
µs/cm
820
23.5 °C