ENHANCE GX-H2 Instrucciones De Operación página 8

EN
Operating instructions
Microphone setup:
Plug the GX-H2's 3.5mm microphone plug into
your computer's microphone jack. Check your
sound settings to ensure the GX-H2 is set as the
default input device. Position the microphone
near the user's mouth. If recordings are too
quiet, adjust your microphone volume and
microphone boost in the levels tab of your
microphone settings.
Headphone setup:
Plug the GX-H2's 3.5mm headphone plug
into your computer's headphone jack. Your
audio will play through the GX-H2 headset.
If you do not hear audio through the
headset, check your computer audio settings
to make sure device playback settings are
correct. Also, try adjusting volume/mute
controls on the headset and computer.
Volume adjustment:
The wheel located on the in-line controller can be
used to adjust volume.
Microphone control:
Move the slider on the in-line controller to the X
position to mute the microphone.
8