AQUARAY MiniLED 500 Manual De Instrucciones página 5

PARTS LIST/DIMENSIONS
1. Power supply unit (PSU).
2. Mains power supply cord with UK, European or
USA plug configuration.
3. MiniLED 500 lamp unit with 3m (10ft) cable
complete with rocker switch and matching plug
connector to the DC outlet from the PSU.
4. Fixing brackets - two supplied.
5. Fixing kit.
ASSEMBLY
The MiniLED 500 is fully assembled and ready to
use.
INSTALLATION
Please note: This lamp unit is NOT designed to
be operated partially or fully submerged. It must
be SECURELY mounted not less than 25mm
from the maximum water level of the aquarium.
Its versatile, compact and light-weight design allows
the MiniLED 500 lamp unit to be installed above your
aquarium in a variety of ways to suit any application.
The design of the lamp unit means it can be fitted in
close proximity to the surface of the aquarium.
However, mounting further from the surface of the
aquarium will maximise the spread of light from the
MiniLED 500's unique wide-angled beam.
3
140 mm