Connecting A Microphone - essentiel b MS-E-500-D Manual De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Detecting incoming calls
When a call is received or dialled, the smartphone pauses playback of the music. The transmission
of music from your phone to the micro hi-fi system is interrupted.
When the call ends, the telephone resumes playback at the point where it was interrupted and plays
the music on the micro hi-fi system's speakers again.
Cancel the active Bluetooth* connection
If you wish to cancel the pairing between the micro hi-fi system and your smartphone, to pair it with
another smartphone, press and hold the
for 5 seconds. The blue PAIR LED flashes again on the display and Not Connected is displayed on the
screen.
connecting the micro hi-fi system to an auxiliary source
The 3.5 mm AUX jack (19) allows you to connect an audio player and play music from this player on
the micro hi-fi system's speakers.
Plug the end of a 3.5 mm jack/3.5 mm jack cable (not included) into the AUX (19) socket on the front of
1.
the unit, to the right of the CD tray.
Plug the other end into the audio output jack of your media player. Refer to the supplier's instruction
2.
manual for more information.
Select the AUX (19) source by repeatedly pressing the SOURCE button on the remote control or
3.
the unit .
Start playback on your auxiliary source, the sound plays through your micro hi-fi system's speakers.
4.
40
V.1.0
T U N IN G
button on the micro hi-fi system or the remote control
EQ /
ID 3
SU PER
BASS
connecting a removable USB device
IR
STANDBY
Switch on the micro hi-fi system.
Connect the USB stick containing the files to be played to the USB port (17) on the front right of the
1.
unit, to the right of the CD tray.
Select the USB source by repeatedly pressing the SOURCE button on the remote control or the unit .
2.
/
The screen displays the number of playable files and folders found on the stick.
3.
M EN U /
Playback of file 1 starts automatically. To pause, press the
4.
PA IR/
IN FO /
or the remote control. To go directly to another track, use the
SC A N /
playback, press the STOP
button.
SEL EC T
The playback of files on the USB stick is similar to that of CD tracks. See this section for more
5.
information.

connecting a microphone

The MIC (18) microphone input is compatible with all modes. You can sing over any medium or even
live.
7
Connect a wired microphone with a 3.5 mm jack to the MIC (18) jack on the front panel of the unit,
1.
SOURCE
1
8
to the right of the CD tray, and switch the microphone button to ON.
INFO/MENU
EQ
PROG/PRESET
9
2
10
Press the MIC.VOL button on the remote control to activate the microphone, then press the
2.
MIC.VOL
3
11
12
MUTE
VOLUME
buttons to increase or decrease the microphone volume. To stop using the microphone, press
4
13
/10+
/10
14
SELECT
the MIC.VOL button on the remote control again. If you do not press the button again, the micro
5
15
PLAY MODE
SCAN
BASS
16
17
6
hi-fi station will automatically return to the general volume control after 5 seconds of inactivity.
18
button on the micro hi-fi system
and
buttons. To stop
FU N C T IO N
1
2
3
4
5
6
7
SOURCE
8
INFO/MENU
EQ
PROG/PRESET
9
10
MIC.VOL
and
11
12
MUTE
VOLUME
13
14
SELECT
15
16
PLAY MODE
SCAN
BASS
17
18
41
V.1.0

Publicidad

Tabla de contenido
loading

Tabla de contenido