Table Assembly; Care And Cleaning - HAMPTON BAY BARNSLEY FSS61119RA-ST Guía De Uso Y Cuidado

Table Assembly

1
Connecting the table legs to the
table rim
□ Turn the table rim (M) upside down.
□ Attach each of the table legs (N) to the table rim (M) using
M6x18 bolts (CC) and M6 washers (EE).
NOTE: Loosely tighten all bolts using hex wrench (MM).
N
3
Adding the glass
□ Turn the table right side up.
□ Check to ensure that the table is securely assembled.
□ Carefully place the glass (L) on top of the table.

Care and Cleaning

□ For best results, clean the frames with a damp cloth and dry the frames thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
□ Do not clean with abrasive materials, bleach, or solvents.
□ Store the table and chairs in a dry, sheltered place when not in use.
□ Keep the table and chairs out of fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or
wind.
CC
EE
M
2
Connecting the leg connector to
the table legs
□ Attach the leg connector (O) to the table legs (N) using
M6x18 bolts (CC) and M6 washers (EE).
□ Securely tighten all of the bolts on the table with the hex
wrench (MM).
CC EE
1 1
O
L