OPERATION
Getting Started
• Place the heating mat on a flat, dry surface.
•
Insert the mains plug into a socket with a voltage of 220-240 V.
•
Press the on/off button. The heating mat heats up within 15 minutes and
keeps the temperature constant.
•
Switch off again after use.
Setting the level
•
Press the ON/OFF button to set the heating level.
•
Go through the settings High (red lamp), Medium (green lamp), Low (blue
lamp) and OFF one after the other by pressing the On/Off button.
Setting the timer
•
To set the switch-off time, press and hold the On/Off button. Now one or
more lamps flash. The time setting starts at 30 minutes.
•
Now you can make the following timer settings by pressing the On/Off
button repeatedly.
Active lamps
Blue
Yellow
Red
Green + Blue
Red + Green
•
If you have not pressed any button after a few seconds, exit the timer
settings.
•
If you want to deactivate the timer, switch off the unit.
Switch-off time
30 minutes
1 hour
2 hours
3 hours
5 hours
EN
9