Stanley STHT1-77032 Manual Del Usuario página 4

5.
Push the battery door down until it snaps in place
GB
(Figure C #5).
When the tool is ON, the battery level appears in the
display window (Figure E #1).
Operation
Measuring the Distance to a Wall or Object
1.
Click (Figure A #3) to turn on the tool.
2.
Point the laser at the top of the tool (Figure A #1)
toward the wall or object whose distance you need to
measure (Figure D #1).
3.
Click to measure the distance from the bottom of
the tool to the wall or object (Figure D #2).
4.
At the bottom of the display window (Figure A #2),
view the current measurement (Figure E #3).
To take a new measurement, click
the current measurement up to the previous line on the
display window (Figure E #3). Then repeat steps 2-4.
Measuring Distances Continuously
To take a series of measurements as you move around,
change to Continuous Measure mode.
1.
Click (Figure A #3) to turn on the tool.
2.
Point the laser at the top of the tool (Figure A #1)
toward the wall or object whose distance you need to
measure (Figure D #1).
3.
Click and hold
the Continuous Measure mode.
4.
At the bottom of the display window (Figure A #2),
view the current measurement (Figure E #3), which
will keep changing as you move the tool.
5.
To take the current measurement (from the bottom
of the tool to the wall or object) and exit Continuous
Measure mode, click
To take a new measurement, click
current measurement up to the previous line on the
display window. Then repeat steps 2-5.
Measuring Area
You can measure the area of a wall, floor, or object.
1.
Click (Figure A #3) to turn on the tool.
2.
Click to show
4
to move
for 4 seconds to turn on
(Figure E #3).
to move the
on the display window
(Figure E #4).
3.
Measure the width.
• Point the top of the tool at one side of the target
(wall, floor, or object).
• Position the bottom of the tool at one end of
the target and point the laser dot across the width
(Figure F #1).
• Click to display the width measurement at the
top of the display window.
4.
Measure the length.
• Position the bottom of the tool at one end of
the target and point the laser dot across the length
(Figure F #2).
• Click to display the length measurement on the
second line of the display window.
5.
View the Area measurement at the bottom
of the display window (Figure E #3).
Measuring Volume
You can measure the volume of a room or object.
1.
Click (Figure A #3) to turn on the tool.
2.
Click twice to show
(Figure E #4).
3.
Measure the width.
• Point the top of the tool at one side of the target
(room or object).
• Position the bottom of the tool at one end of
the target and point the laser dot across the width
(Figure F #1).
• Click to display the width measurement at the
top of the display window.
4.
Measure the length.
• Position the bottom of the tool at one end of
the target and point the laser dot across the length
(Figure F #2).
• Click to display the length measurement on the
second line of the display window.
5.
Measure the height.
• Positon the bottom of the tool at one end of
the target and point the laser dot across the height
(Figure F #3).
• Click to take the measurement.
on the display window