Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Pneumatic Chair
with 5 custors
1. For Your Safety
Please read this Operating instructions
before using the product!
For effective use of the product as intended, it is essential that all safety
and other information in these operating instructions is
adhered to.
HAZET will not be liable for any injuries to persons or damage to prop-
erty originating from improper application, misuse of the product or a
disregard of the safety instructions.
They are the sole responsibility of the operator and user.
2. Explanation of Symbols
ATTENTION : Please pay attention to these symbols!
Read the Operating Instructions!
The user/owner of this product is obliged to observe the operating
instructions and should ensure all users of this product use it
according to the information given in this manual.
NOTICE!
This symbol marks advice which is helpful when using the
product.
CAUTION!
This symbol marks important specifications, dangerous condi-
tions, safety risks and safety advice.
ATTENTION!
This symbol marks advice which if disregarded results in
damage, malfunction and/or functional failure of the product.
3. Spare Parts
• Only use the manufacturer's original spare parts.
• Unsuitable or defective spare parts may cause damage, malfunc-
tion or total failure of the product.
• The use of non approved spare parts will void all warranty, service
and liability claims as well as all claims for compensation against
the manufacturer or its agents, distributors and sales representa-
tives.
4. Disposal
• Dispose of in compliance with guidelines for environmental protec-
tion and work safety.
• Components can be recycled.
• Metal rests can be scrapped.
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
5. Appropriate Use
Sit down gently. Avoid shock loads caused by jumping or falling
onto the seat.
• Do not stand on the seat.
• Move over smooth, seamless surfaces only.
• Do not exceed rated capacity.
6. Storage
The product should be stored as
indicated below:
• Do not store outdoors.
• Store in a dry and dust-free place.
• Do not expose to liquids or aggressive substances.
• Storage temperature: -10° up to +45°C
• Relative air humidity: 65% max.
7. Tool Elements
Seat
Level
Pneumatic unit
Base plate
4
Tool tray
5
Distance sleeve
6
Castors
7
8. Technical Information
• Height: min. 38 cm – max. 51 cm
• Carrying Capacity: max. 150 kg
9. Included in Delivery
1 Seat, 1 Tool tray, 1 Distance sleeve, 1 Pneumatic unit,
1 Base plate, 5 Castors, 5 Washers, 5 Lock washers,
5 Nuts.
10. Assembly instructions:
• Attach castors with the washers, lock washers and nuts on the
base plate.
• Insert the pneumatic unit into the center hole of the base plate.
• Slide the distance sleeve over the pneumatic unit down to the base
plate.
• Then slide the tool tray over the pneumatic unit until the tool tray
affect the distance sleeve.
• Attach the seat onto the piston of the pneumatic unit.
11. Maintenance and Cleaning
• Do not let fall down. Do not expose to impacts or liquids as they
might affect the functionality and damage the product.
• Clean the cushions with a damp cloth.
• Clean the castors regularly, remove grease, dirt and other parts.
• Check the screws and connections regularly and tighten them if
necessary.
195-4
5
6
4
7
Publicidad
