Descargar Imprimir esta página
BIG ASS FANS AIREYE OCCUPANCY Manual De Instrucciones
BIG ASS FANS AIREYE OCCUPANCY Manual De Instrucciones

BIG ASS FANS AIREYE OCCUPANCY Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

B
A
Parts and hardware
A. Occupancy Sensor
B. Bracket
C. (2) 1/4-20" Nyloc Nut
D. (2) 1/4-20 x 1.5" Hex Head Bolt
E. (4) Fender Washer
Installation
1. Attach occupancy sensor securely to rear guard with included washers, hex bolts, and nyloc nuts.
2. Connect motor cable to corresponding occupancy sensor cable. Connect occupancy sensor power cable to
120 V AC adapter cable.
3. Use adjustment knob to angle motion sensor toward airflow target area.
4. Set preferred speed using standard controller.
When the occupancy sensor is installed and receiving power, its power LED stays illuminated. The occupancy-
activated LED illuminates only when occupancy is detected. The occupancy sensor turns off the fan if no movement
is detected for five minutes. The fan will return to the last speed setting when occupancy is detected.
AIREYE OCCUPANCY SENSOR
D
I
J
F. Power Cable
G. Motor Connection Cable
H. Adjustment / Tightening Knob
I. Power LED
J. Occupancy-Activated LED
WWW.BIGASSSOLUTIONS.COM
© 2017 DELTA T CORP.
E
C
ALL RIGHTS RESERVED.
H
F
G
PATENT PENDING

Publicidad

loading

Resumen de contenidos para BIG ASS FANS AIREYE OCCUPANCY

  • Página 1 AIREYE OCCUPANCY SENSOR Parts and hardware A. Occupancy Sensor F. Power Cable B. Bracket G. Motor Connection Cable C. (2) 1/4-20" Nyloc Nut H. Adjustment / Tightening Knob I. Power LED D. (2) 1/4-20 x 1.5" Hex Head Bolt E. (4) Fender Washer J.
  • Página 2 DÉTECTEUR DE PRÉSENCE POUR AIREYE Composants et visserie A. Détecteur de présence F. Câble d’alimentation B. Support G. Câble de raccordement au moteur C. Écrous à bague nylon 1/4-20 po (2) H. Molette de réglage/serrage D. Vis à tête hexagonale 1/4-20 × 1,5 po (2) I.
  • Página 3 SENSOR DE OCUPACIÓN AIREYE Piezas y accesorios A. Sensor de ocupación F. Cable de energía B. Soporte G. Cable de conexión del motor C. (2) Tuercas Nyloc de 1/4-20 in. H. Perilla de ajuste/apriete D. (2) Pernos de cabeza hexagonal de 1/4-20 x 1.5 in. I.
  • Página 4 AIE-INST-177-ENG-01 REV. B 2348 Innovation Dr, Lexington, KY 40511 1 (877) BIG-FANS | WWW.BIGASSFANS.COM...