To Select Radio Stations Manually - Retekess V112 Manual Del Usuario

To Adjust the Volume Keys
During radio broadcast listening, press VOLUME+/- to
increase/decrease the volume level, meanwhile, the LCD
display will show "VOL" icon.

To Select Radio Stations Manually

Short press the AM/FM band key to hear AM or FM radio
broadcasts. Short press the ∧ key or ∨ key, and the radio
frequency will increase or decrease by 100KHz for the
FM broadcast band or by 9/10kHz for the AM broadcast
band. If you long press the ∧ key or ∨ key, and the
frequency will increase or decrease to search for radio
stations automatically. When a radio station is received,
the search will stop and play searched AM or FM radio
station.
AM frequency step set to 9KHz or 10KHz
When the power is turned off, press and hold the M- key
and MEMO key both at the same time, after 3 seconds,
the screen will display the current AM step value, press
∧ or ∨ key to switch 9KHz and 10KHz. When choosing
the correct AM step, wait until thestep number
disappears, which means the AM step is set up
successfully.
NOTE: In the United States, Canada and other North
American and South American countries mustset to 10
KHz, other countries must set to 9 Khz.
Storing Radio Stations Automatically
L o n g p r e s s t h e S C A N k e y a n d t h e r a d i o c a n
automatically search and store radio stations. The
stations are searched and stored from low frequencies
to high frequencies in order, meanwhile, the LCD display
will show "SCAN" icon.
Storing Radio Stations Manually
Press the MEMO key, the radio will store the current
3
EN