DESCRIPTION
1. Lid
2. Motor unit
3. On/off switch
4. Blade
5. Metallic bowl
GRINDER INSTRUCTIONS
Before using for the first time : Wipe the metallic bowl, the blade and the lid with a dry
duster. The appliance must be unplugged.
1. Take off the lid, put the coffee beans into the metallic bowl (Maximum capacity: 85 g).
The blade is removable; be sure that it is in place before adding the coffee beans.
2. Put the lid in place.
3. Plug in.
4. Hold the lid on firmly with one hand, push the on switch with the other hand until the
desired texture of coffee is achieved.
Do not take off the lid until the blade has completely stopped.
5. The grinding time must be in relation to the quantity of coffee required.
− Coarse ground : 10 Seconds
− Average ground : 20 - 30 Seconds.
− Fine ground : 40 - 60 Seconds.
6. When the blade has stopped rotating, unplug. Take off the lid and then remove the
ground coffee.
CLEANING
It is recommended to take out all the ground coffee in order to avoid deterioration of
aroma through any remaining old grounds.
1. Unplug.
2. Remove the lid and rinse under running water and dry completely. The lid cannot be
cleaned in a dishwasher.
3. Take out the blade by turning it anti-clockwise. Clean it and dry thoroughly.
4. Clean the metallic bowl with a damp sponge.
RECYCLING
End-of-life electrical and electronic products:
Your appliance is designed to operate for many years. However, the day you plan to
replace it, do not throw it away with normal household rubbish or in a landfill but take it
to a suitable collection point provided by your local authority (or to a recycling centre if
applicable).
Environmental protection first!
Your appliance contains numerous materials that can be recovered or recycled.
i
Take it to a collection point for processing.
EN
5