Safety Precautions; How Does It Work - One for All HC-8300 Guia Del Usuario

- This product should not be exposed to high temperatures.
- This product should not be used in damp places or close to
water.
- The HC-8300 should only be connected to a power supply of
220-240 VAC / 50Hz.
- The maximum load that can be connected to this HC-8000 and
HC-8300 is 1000 Watt: please check the load before usage.
- The maximum load that can be connected to this HC-8010 is 300
Watt: please check the load before usage.
- This product should not be covered.
- This product is to be used only in conjunction with ONE FOR
ALL Light Control compatible remotes. Compatible remotes
all feature the logo shown here..........
The HC Receiver plugs into the wall socket, in between your lamp and the
power outlet. It can be switched ON and OFF either manually by the switch
on the front or by remote control using a ONE FOR ALL Universal Remote
Control.
The HC-8010 unit also allows you to dim or brighten your lights.
The HC Receiver is controlled by Radio Frequency (RF), which enables it be
controlled even if it is not directly in sight. In order to change the Infra Red
(IR) signal of your remote control into RF, the Command Centre is required.
To control your light(s), simply point to the Command Centre and press the
function you want.
WWW.ONEFORALL.COM

Safety precautions

How does it work?

5