Go groove FlexSMART X2 Instrucciones De Operación página 8

EN
Operating instructions
Power on.
Select FLEXSMART X2 to pair.
1 Amp USB Charging
Plug it in.
Tune your car radio to a blank station.
3.5mm Connection
Connect non-Bluetooth audio devices.
8
Pair.
Press and hold for 5 seconds and the
lights will blink red and blue.
Tune the X2.
Twist the knob to tune the FlexSMART
X2 to the same blank station. Try a
few different stations to find the best
sounding settings.