Configuring A Fixed Ip Address - Conceptronic C150APM Guía De Instalación Rápida

If the information above matches your configuration you can continue configuring the access point in
chapter 5.
If the information above does not match your configuration, you temporary need to assign a fixed IP
address to your computer in the same IP range as the access point, in order to configure the access point.
You can find the steps to configure a fixed IP address in chapter 5.2.

5.2 Configuring a fixed IP address

If the IP address of your computer is not in the same IP range as the access point, you need to temporary
assign a fixed IP address in the same IP range to your computer.
With the instructions below you can assign a fixed IP address to your computer.
A. Click on 'Start', go to 'All Programs',
'Accessories' and choose 'Run'.
B. Enter the command 'NCPA.CPL' and click on
'OK'.
The "Network Connections" window will appear.
C. Right click on 'Local Area Connection' or
'Wireless Network Connection' (depending
on the connection you use) and select
'Properties'.
B
C
ENGLISH
B
27