Cosatto the ABCs judo Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 55
Softgoods
7
i/ ISOFIT option (fitted with ISOFIX low anchorage points and
3point vehicle belt only):
Refer to step 14 - 15 to fit the seat in with the ISOFIX low
anchorage points in addition to vehicle belt.
ii/ Belted option (fitted with 3 point vehicle belt only):
Refer to step 18 to retract the ISOFIX arms to fit with vehicle
belt only.
25-
Adjust the seat unit to its most upright position, refer to step 2.
Position the child car seat on the vehicle seat, forward facing.
Place your child into the child car seat.
Pull the vehicle belt out and around the child (a) and fasten the
buckle (b).
Fit the diagonal vehicle belt through the headrest diagonal
vehicle belt guide (c).
Tension the vehicle belt (d & e).
IMPORTANT: The position of the vehicle seat belt buckle can
affect the stability of the child car seat. In an accident this
could stop the child car seat from protecting your child as
well as it should. After tightening the vehicle seat belt, if the
buckle lies in the position marked
car seat in another seating position in your vehicle. If in doubt
consult either the child car seat manufacturer or retailer.
Removal is a reversal of this procedure.
26-
Removing:
If fitted, remove the chest pads, seat liners, buckle and crotch pad
(refer to step 22 - 23).
Remove the headrest cover (a).
Remove the side impact protection covers (b).
Remove the seat cover (c & d).
Refitting is a reversal of this procedure.
then try fitting the child

Publicidad

Tabla de contenido
loading

Tabla de contenido