THERMEx PERPIGNAN Instrucciones De Montaje página 60

60 THERMEX Perpignan
INSTALLING THE DUCT WHEN THE HOOD IS TO BE USED FOR RECIRCULATION
If the hood is going to be used for recirculation, the cover panel must be installed up to the ceiling to cover the duct.
The duct is therefore installed as follows:
1
x2
Measure the placement of the bracket and mark
the position of the holes on the wall.
NOTE: The bracket must be positioned so that
it matches the holes in the duct.
4
Place the duct on the hood.
2
x2
x2
Pre-drill the holes and insert the rawlplugs.
5
x2
Push the topmost section of the duct upwards
and attach it to the bracket with the two
self-tapping screws.
M 536991350922122020
3
Screw the bracket and cover panel onto the
wall.