Tabla de contenido
Publicidad
Hardware Installation is now completed, enjoy HomePlug
Powerline connectivity.
Installation in homes with NO EXISTING HomePlug
Network:
1. Make sure that another HomePlug 200M device is
connected to your network at the router or directly to a
computer.
2. Connect the HomePlug Pro PoE Ethernet Port to your
Ethernet device.
3. Wait a few seconds for start-up to be completed, and
then check the LEDs.
• The Power LED should be ON
• The HomePlug LED will be ON
• The Ethernet LED should be ON
4. Hardware Installation is now completed, enjoy
HomePlug Powerline connectivity.
4
Publicidad
Tabla de contenido
