LevelOne PLI-3110 Guía De Instalación Rápida página 4

Wait a few seconds for start up to be completed, and then
check the LEDs.
• The Power LED should be ON
• The HomePlug LED will be ON
• The PoE LED should be ON
Hardware Installation is now completed, enjoy HomePlug
Powerline connectivity.
Installation in homes with NO EXISTING HomePlug
Network:
1. Make sure that another HomePlug 200M device is
connected to your network at the router or directly to a
computer.
2. Connect the HomePlug Pro PoE Ethernet Port to a
802.3af enabled PoE Powered Device.
4