Micro-Usb Charger; Attaching Intergrated Microphone/Receiver Headset (Earpiece) - Motorola PMLN8298 Manual Del Usuario

Control remoto inalámbrico de operaciones críticas
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
Audio/Bluetooth Indication
Solid red
Blinking in green
NOTE: Microphone is muted and incoming call indication is not applicable when function
as a standalone PTT device.
Table 6: Status Indication
Indicator
Audio/Bluetooth
Power
NOTE: To determine the detail status of the Pod, short press the Power button.
Table 7: Operation Mode Indication
Indicator
Bluetooth and Power LED
Refer to
Switching the Operation Mode
2.1.3

Micro-USB Charger

This section provides information on using the Micro-USB Charger.
The Micro-USB charger is a handy port that allows you to conveniently charge your battery.
Make sure that your device is turned Off.
Plug the Micro-USB cable into the Micro-USB charging port on your device.
Connect the USB Charger to a nearby and easily accessible wall power outlet.
CAUTION:
Hold the USB connector when plugging in and out. Do not pull the cable.
Do not twist the dust cover.
2.2

Attaching Intergrated Microphone/Receiver Headset (Earpiece)

Procedure:
1 To attach and lock the earpiece, align the unlock symbol on the connector and push the
connector in and turn the connector until the lock symbol is aligned.
Description
Mic muted
Receiving incoming call
Indication
Double-blinking blue
Double-blinking green
Double-blinking amber
Indication
Both LEDs blink red si-
multaneously.
The Bluetooth LED blinks
blue twice and the Power
LED blinks green twice si-
multaneously.
for proper operation mode setup.
Chapter 2 : Getting Started
Description
Connected
Battery level is high
Battery level is medium
Description
Operation mode error
POD is entering or exiting Dark Mode
MN007883A01-AB
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wp300

Tabla de contenido