Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Display Setting
You can change certain aspects of the DVD display screens,
still mode setting, the display panel on the front of the DVD
player and Progressive settings.
D
Press the SETUP
button
in stop mode.
IF_ Press the Cursor
buttons
(_
or _)
to select
CUSTOM,
then press the
ENTER
button.
° The custom mode will appear.
Press the Cursor
buttons (_ or
_) to select DISPLAY, then press
D
the ENTER button to confirm.
&ql Press the Cursor
buttons
(A or
T) to select
an item, then press the ENTER
button.
D
TvASPECT
(Oefault :4:3 LETTER
BOX) U! K
o Press the Cursor
buttons (_ or
............................................................................................................
T) for an item selection, then
_
_i__ _
press the ENTER button.
• Select 4:3 LETTER BOX for a
black bars appears on top and
bottom of the screen.
• Select 4:3 PAN & SCAN for a full
height picture with both sides
trimmed.
o Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
STILL
MODE
(Default
: AUTO)
• Press the Cursor buttons (_ or
_:_!_
_
"tr) for an item selection (AUTO,
FIELD, or FRAME), then press
the ENTER button,
o This function allows you to
adjust picture resolution and
quality in still mode.
o An individual picture on TV screen is called as "frame',
which consists of two separate images called as "field".
Some pictures may be blurred at the AUTO setting in
still mode due to their data characteristics.
• AUTO: Automatically
selects the best resolution setting
(FRAME or FIELD) based on the data characteristics
of
the pictures.
o FIELD: Select FIELD when the pictures are still unsta-
ble even if AUTO is selected.
FIELD stabilizes the pic-
tures, although the picture quality may become coarse
due to the limited amount of data.
• FRAME: Select FRAME to display relatively motionless
pictures in higher resolution. FRAME improves the pic-
ture quality, although it may unstabilize the pictures due
to simultaneous
output of two field data.
PROGRESSIVE
(De au t:
Om
o Press the Cursor buttons (_. or _)
for set PROGRESSIVE to ON or
OFK then press the ENTER button.......
o The setting will be effective
when you exit the setup screen
by pressing SETUP.
• When PROGRESSIVE
is ON,
RSCAN appears on the DVD
player's display after you exit the setup screen.
o Refer to page 11 for more details.
PROG,MODE
(Default:
AUTO1)
o Press the Cursor buttons (_ or
_:-_i
# _
_) to select a setting (AUTO1,
AUTO2, or VIDEO), then press
the ENTER button.
• This function allows you to
select the image output,
depending on the base material
t/video or film) of the recorded DVD images, when
IDEO OUT is set to COMPONENT
PROGRESSIVE.
o AUTO1 : Automatically
selects the best image output
(AUTO2 or VIDEO) based on the information
of
data stream.
o AUTO2: A combination
of the top and bottom fields is
output as one-frame image.
- 22-
o VIDEO: Either of top or bottom field is output for one-
frame image.
Press the SETUP button to exit and activate the new
settings.
_- Audio Setting
_<
You can change some Audio settings. It only affects during
the playback of DVD discs.
_'_ Press
the SETUP
button
in stop mode.
Press the Cursor buttons (_ or _,-) to select
CUSTOM, then press the ENTER button.
o The custom mode will appear.
Press the Cursor buttons (_
or _)to
se,eet AUDIO, then
| _
i_
_i_:_ii
_ _i
the ENTER button to confirm.
/
_<,,
Press the Cursor buttons (_ or|
_;TC_ _#_I_I_ZL
_IC_T_j_ll
_) button to select an item,
|
then press the ENTER button.
L
• This menu display contains 2 pages. Press the Cursor
button (_) repeatedly to show the next page.
DRC (Dynamic
Range
Control)
(Default
: ON)
o DRC function compresses the
range of sound volume.
o DRC function
is available only on
the discs that are recorded in the
Dolby Digital format.
LPCM
SELECT
(Default
: OFF)
• Set to ON when outputting
in
48kHz (or 44.1kHz).
• This function is available only on
digital outputting of a disc record-
ed in over 96kHz (or 88kHz).
When playing
disc
with
copyright
protection
o The sound will be down sampled at 48kHz, even if you
set to OFR
DOLBY
DIGITAL
TSTREA )QU: K
• Set to BITSTREAM
when the
player is connected to a Dolby
Digital decoder.
o This function is effective only for
the COAXIAL
and OPTICAL con-
nections.
BITSTREAM:
DOLBY DIGITAL signals are output as Bitstream.
PCM:Convert
Dolby Digital to PCM.
DTS
(Default:
BITSTREAM)!_
i
_
• Set to BITSTREAM
when the unit
is connected to a DTS decoder.
BITSTREAM:
DTS signals are output as
Bitstream.
OFF: No DTS sound will be output.
• DTS sound is output only from digital audio outputs.
Press the SETUP
button
to exit and activate
the
new settings.
EN
Publicidad
Tabla de contenido
