Handle Assembly - VonHaus 3500073 Manual De Instrucciones

1. REMOVE SIDE PANEL
Remove SCREWS with a SCREWDRIVER (not supplied).
3. CHEST DRAWERS
Open the TOOL CHEST lid and remove the bars to access the
drawers. The bars can be replaced to stop the drawers opening if
you choose to store this inside the TOOL BOX.
5. CASTER ASSEMBLY
If CASTER assembly is loose, using a screwdriver slightly spread
apart the split bearing on the shaft. If CASTER is tight, crimp
split bearing with pliers. Make only small adjustments until
CASTER fits.
ASSEMBLY
2. REMOVE CHEST

4. HANDLE ASSEMBLY

6. HOOK ASSEMBLY
The HOOKS provided can be fitted into the side of the TOOL
CHEST. These can be used to store hanging tools.
Place the TOOL CHEST on a level surface and remove the
TOOL BOX from the TOOL CHEST.
Insert the handle into the two slots and fix into place with
the BOLTS provided using an ADJUSTABLE WRENCH (not
supplied).
EN