Maintenance Advice - ZIPPY Zy Safe Primecare D9 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
remove the upper section of one of the harness straps by twisting the metal keeper
located behind the backrest and then pulling the end of the harness strap through the
slots of the shell and the cover (23). Repeat the operation on the second strap.
Remove one of the lower section of the harness by twisting the metal keeper located
under the base and then pulling the end of the harness strap through the slots of the
base and the cover (24). Repeat the operation on the second lower section. Remove
the crotch strap by twisting the metal keeper and by passing it through the slots in the
base and the cover (25).
Simply reverse this procedure if you want to re-install the harness of your car
seat.
Forward facing use (Gr.2 // 15 à 25 kg)
Make sure that you have removed the harness of the car seat before starting the
installation. Follow the instructions in the section entitled 'Removing the harness'.
The car seat must be set in its most upright position.
Place the car seat in a front-facing position on the rear passenger seat of your vehicle
and sit your child in the car seat. Pull on the seat belt until it is completely loose. Thread
the seat belt through the openings on the side of the shell and cover of the car seat (26).
Pull on the belt and threaded through the openings on the opposite side of the shell and
cover (27). Fasten the seatbelt (28). On the side nearest the belt winder, pull up the
diagonal belt through the slot located on the side of the shell (29). Make sure the belt
is not twisted and pull it as tightly as possible (30). Check that the diagonal lies across
your child's shoulder, clear of their neck.
Reclining your child seat
Push the adjustment lever located under the front of the seat upwards, then pull or
push the base towards or away from you (31).
Storage of the instruction manual
(32)

Maintenance advice

All the material parts can be removed. Slight stains can be removed using a damp
sponge soaked in soapy water or it can be washed by hand at 30° in soapy water. Do
not use bleach, do not iron, do not machine wash, and do not tumble dry.
23
User guide - GB

Publicidad

Tabla de contenido
loading

Tabla de contenido