Introduction; Proper Use; Features; Technical Information - Parkside PMS 130 Instrucciones Para El Manejo Y La Seguridad

Palm detail sander PMS 130
Ideal for sanding, polishing, de-rusting and much more
Your safety
Please make sure you familiarise yourself fully with the way the tool works before you use it for
the first time and that you understand how to handle electrical power tools correctly. Further details
can be found in the operating instructions
the general safety advice
and for the indicated purposes. By doing this you will be able to work with a high level of safety and
produce better results. Keep these instructions in a safe place. If you pass the tool on to anyone else,
please ensure that you also pass on all the documentation.

Proper use

The sander is intended for dry sanding and polishing of wood, plastic, metal, filler and painted
surfaces. It is particularly suitable for working on profiles, sections, in corners or places where access
is difficult.
Any other use or modification to the tool shall be considered as improper use and could give rise
to considerable dangers. The manufacturer will not accept liability for loss or damage arising from
improper use.
Features of the PMS 130
On/Off switch
Dust extraction adapter
Backing plate (360° rotatable)
Adapter port

Technical information

Nom. power input:
Nominal sanding speed:
Sound pressure level:
Sound power level:
Hand/arm vibration:
. In addition to the above, you must also strictly observe
contained in the accompanying booklet. Use the tool only as described
130 watts
n 11,000 rpm (no load)
o
dB (A)
dB (A)
2
< m/s

Introduction

GB 11
PARKSIDE