Portfolio FY06-043-1 Manual Del Usuario página 3

ASSEMBLY INSTRUCTIONS
1.Take off cap nuts (BB). Then attach the crossbar
(AA) by tightening the machine screws (DD)
securely into the outlet box (not included). The
mounting screws (EE) should protrude away
from the outlet box.
Hardware Used
Crossbar
AA
BB
Cap nut
Machine screw
DD
Mounting screw
EE
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers, black
to black (power) and white to white (neutral).
Attach copper wire to ground wire. Helpful
hint: If necessary, attach copper ground wire
to grounded junction box.
3. Attach wire nuts (CC). Tape wire nuts (CC)
and wires together.
Hardware Used
CC
Wire nut
1
x
1
x 2
x 2 BB
DD
x 2
2
3
x 3
CC
Lowes.com/portfolio
4
ASSEMBLY INSTRUCTIONS
4. Screw threaded nipple and nut (D) to the base
of fixture (C). Place the round tube (E) and font
(F) around threaded nipple and nut (D), then
tighten with knob (G) until secure.
AA
EE
5. Install light bulb (not included). Use one 60-
watt max. standard-base bulb or one 13-watt
standard-base CFL bulb.
6. Remove decorative nut (A), place cover (B)
onto the fixture (C). Secure with decorative
nut (A).
4
C
D
E
F
G
5
6
A
B
C
Lowes.com/portfolio
5