Publicidad
AT-8201 Optional Upgrade Card Installation Instructions
Figure 1: FORMULA 8200 with
Blank Panel for
Optional Upgrade
Card
Figure 2: FORMULA 8200 with
Upgrade Card
Installed
The following steps describe how to install the optional 8-port upgrade
card in your FORMULA 8200
1. Turn off the power on the switch and unplug the unit.
2. Loosen the thumbscrews on the blank upgrade panel (Figure 1) until
they disengage from the chassis.
3. Remove the blank upgrade panel (pull firmly toward you) and store for
future use.
Make sure that the upgrade card is handled using proper static-free
procedures and that you touch a grounded, unpainted surface on the
FORMULA 8200 switch prior to inserting the card.
4. Insert the upgrade card in the slot and seat it firmly in place (Figure 2).
5. Align and tighten the thumbscrews on the upgrade card.
6. Tighten the locking screw in the lower right corner of the upgrade card.
7. Reconnect the power, and turn on the switch.
RESET
RS-232 TERMINAL PORT
RESET
RS-232 TERMINAL PORT
TM
Switch.
Warning
Thumbscrews
Blank upgrade panel
10/100BASE-T NETWORK PORTS
1
2
3
4
GREEN - LINK
YELLOW - DIAG
STATUS
POWER
Locking screw
10/100BASE-T NETWORK PORTS
9
10
11
12
10/100BASE-T NETWORK PORTS
1
2
3
4
GREEN - LINK
GREEN - ACTIVITY
YELLOW - DIAG
YELLOW - COLLISION
STATUS
POWER
AT-8201 Installation Guide
10/100BASE-T NETWORK PORTS
5
6
7
8
GREEN - ACTIVITY
YELLOW - COLLISION
10/100BASE-T NETWORK PORTS
8201
13
14
15
16
10/100BASE-T NETWORK PORTS
5
6
7
8
1
Publicidad
