Publicidad
Idiomas disponibles
Idiomas disponibles
DP760 DECT Repeater Association
Auto Association
To auto associate DP760 DECT Repeater with DP750 Base
Station:
1. Power on the DP760 DECT Repeater.
2. After boot up, the association LED will start blinking to indi-
cate that the repeater is searching for nearby base stations.
Note: If all the LEDs remain on, it indicates that the DP760
DECT Repeater has successfully associated with a DP750
Base and is ready for use.
3. Open subscription on DP750 Base Station using one of fol-
lowing methods:
• Rebooting the Base station.
• Long press on page/subscribe button on the back panel
of DP750 for 7 seconds.
• Access DP750 Web GUI and press subscribe button
4. The DP760 DECT Repeater will automatically pair to DP750.
Upon successful association with the DP750 Base Station all
LEDs will turn ON.
Note: For auto association, the option "Use manually con-
figured RFPI" under DP760 Web GUI should be disabled (by
default disabled).
Manual Association
To manually associate DP760 DECT Repeater with DP750
Base Station:
1. Access the Web GUI of your DP760 using the admin's user-
name and password. (Default username and password are:
admin/admin).
2. Navigate to DECT → General Settings and set "Use Manu-
ally Configured RFPI" to "Yes".
3. On "Manually Configured Base RFPI" field, enter DP750
Base Station RFPI address.
~3~
Note: The RFPI Address of your DP750 Base Station is avail-
able under the Web GUI → Status → DECT Base Status → Base
DECT RFPI Address.
4. Click Save and Apply to confirm the new settings.
5. Open subscription on DP750 Base Station using one of fol-
lowing methods:
• Rebooting the Base Station.
• Long press on page/subscribe button on the back panel
of DP750 for 7 seconds.
• Access DP750 Web GUI and press subscribe button
6. The DP760 DECT Repeater will automatically pair to DP750.
Upon successful association with the DP750 Base Station all
LEDs will turn ON.
Repeater Management Mode on DP750
The repeater management mode on the DP750 allows to
associate, dissociate and manage discovered and paired
.
repeater stations from DP750 web GUI.
Enabling Repeater Management Mode on DP750
The following steps illustrate how to enable and use the "Re-
peater Management" mode:
1. Access DP750 Web GUI. (Default username and password
are: admin/admin).
2. Navigate to DECT → General Settings and set Enable Re-
peater Management to "Yes".
3. Press Save and Apply, then reboot the unit to apply the
new settings.
Associating DP760 using Repeater management mode on
DP750
The repeater management mode displays discovered and
paired devices using their name, IP and Mac addresses and
also gives the possibility of associating the DP750 Base Station
with DP760 DECT Repeater.
~4~
.
Publicidad
