Adjust The Temperature; Filling The Water Tank; Steam Ironing - PALSON Iris Modo De Empleo

ADJUST THE TEMPERATURE

Turn the temperature selector to the desired position pursuant to the following information on fabrics:
IRONING ADVICE
1. Sort articles that will be ironed according to the fabric type. Ironing instructions tend to be sewn in a seam
inside the garment and they must be respected at all times. Begin with ironing garments that require a lower
heat setting.
2. If you are unsure of a garment's fiber content, test a small area (in an inside seam or hem) before ironing the
entire garment.
3. When in doubt, start with a low temperature. If wrinkles are not removed, increase the temperature gradually
until you find the setting that provides the best results without damaging the fabric.

FILLING THE WATER TANK

- Unplug the steam iron before filling the water tank.
- Put the steam selector in position "0".
- Put the steam iron in a horizontal position.
- Pour water slowly in the water tank.
- Do not pass the "MAX" line of the tank so it will not overflow.
AUTOMATIC SHUTOFF SAFETY FUNCTION
1. The automatic shutoff safety function will turn off the iron after 30 seconds if it is not moved in a horizontal
position or rather 8 minutes if it is not moved when in a vertical position. Upon activating the automatic shutoff
function, the blue light starts to blink.
2. Just shake the iron and the blue light will stop blinking. Wait for the heat light to turn on and it shuts off,
meaning the iron has reached the appropriate temperature.
3. If the blue light stops blinking and the heat light does not shut off, the iron has already reached the suitable
temperature.
4. The iron can now be used.

STEAM IRONING

- Unroll the cable. Be sure the iron is not plugged into the outlet before filling it with water.
- Turn the steam selector to position "0".
- Fill the iron with water. Be careful to never fill it above the water tank <<MAX>> line.
- Plug in the iron.
- Adjust the steam position temperature switch (
- In this setting, the iron can be used as a steam iron when the heat light is turned off.
The light will turn on and off periodically during ironing depending on whether the temperature switch functions
correctly.
- Put the steam selector in position "0". Turn the steam selector to position 0 so that the steam stops.
- There are a total of 7 positions that allow for steam to be adjusted easily. Put the iron in a vertical position
on the rest heel to reorganize the clothing or while it is not being used. Steam will stop upon the iron's being
placed on the rest heel.
), the heat light will come on.
9