Mopar 82214000AB Instrucciones De Montaje página 5

ADD SALES CODE TO VEHICLE IN DealerCONNECT
NOTE: The wiTECH software level must be at the latest release to perform this procedure.
NOTE: Vehicle VIN must be updated with the sales code of the added accessory in order to
enable system functionality. Using the DealerCONNECT web site and the scan tool, complete
the procedure below:
1. Log on to https://dealerconnect.chrysler.com.
2. In the "Service tab"-"Warranty Administration" box -"Vehicle Option Updates" screen,
enter the vehicle VIN and add the sales code RFX (Wireless Charging) as a
"Dealer Installed Option".
3. Confirm that the new sales code has been successfully added to the VIN.
RESTORE BCM PROXI CONFIGURATION
1. With the WiTECH tool connected to both the internet (via Ethernet port or wireless connection)
and the vehicle, follow the steps below:
2. Use WiTECH tool to run “Restore BCM Proxi Configuration” which can be found in the
VEHICLE PREPARATION tab of the main topology screen. Following the prompts will
upload the new vehicle PROXI configuration to the BCM.
PROXI CONFIGURATION ALIGNMENT
1. Use the programmed key to place the ignition into RUN state.
2. Use WiTECH tool to run “Proxi Configuration Alignment” which can be found in the
Vehicle Preparations tab of the main topology screen. This will update the rest of the ECUs
on the vehicle with the PROXI configuration that is now stored in the BCM.
3. Cycle ignition OFF.
11-21-13
www.mopar.com
5
K6861880