Original Accessories/Auxiliary Equipment; Before Use; Milling Cutter Set; Inserting A Milling Tool - Parkside POF 1200 D3 Traducción Del Manual De Instrucciones Original

■ Never mill over metal objects, nails or screws.
The milling cutter can be damaged and it can
lead to increased vibrations.
■ Use a suitable detector to locate hidden utility
lines or consult your local utility company.
Contact with electrical lines can cause fires or
electric shocks. Damage to a gas pipeline can
lead to an explosion. Drilling into a water pipe
can cause damage to property.
■ The maximum speed indicated on the tool must
not be exceeded.
■ Tools with visible cracks must be discarded.
Original accessories/auxiliary
equipment
■ Only use the accessories and additional
equipment that are specified in the operating
instructions and are compatible with the
appliance.

Before use

Milling cutter set

Original accessories included in delivery
For profiling
Rounding cutter Ø 22 mm/R 6.3 mm
Profile cutter Ø 25 mm/R 4 mm
Chamfer milling cutter Ø 22 mm/R 6.3 mm
V-slot milling cutter Ø 12,7mm/angle 90°
For linking
Slotting cutter Ø 6 mm
Slotting cutter Ø 12 mm
NOTE
► If the ball bearing of a milling cutter has
become loose, tighten it with the hex key
supplied with the cutter set.
│ GB │ IE
■ 6

Inserting a milling tool

♦ Press the spindle locking button
down.
♦ Undo the union nut
wise with the open-ended spanner
♦ Release the spindle locking button
♦ Now insert the milling tool.
This must be inserted to a depth of at least
20 mm.
♦ Press the spindle locking button
down.
♦ Tighten the union nut
spanner .
♦ Release the spindle locking button
Connecting the dust extraction
adapter
♦ Fit the dust extraction adapter
provided for the dust extraction adapter
♦ Screw the screws
base plate .
♦ Attach an approved dust and sawdust extractor
to the dust extraction adapter

Reducer

Connecting
♦ Push the reducer
adapter .
♦ Push the hose of a suitable of vacuum cleaning
appliance (e.g. a workshop vacuum) onto the
reducer .
Removal
♦ Pull the hose of the vacuum cleaner off the
reducer .
♦ Remove the reducer
and hold it
by turning it anticlock-
.
.
and hold it
using the open-ended
.
onto the holes
9a
into the underside of the
(see fig. F).
into the dust extraction
.
POF 1200 D3
.