Radio Operation - Trevi RC 850 BL Manual De Instrucciones

RC 850 BL
12
1
11
LOCATION OF CONTROL
1. On/Off/Auto
2. Time Set
3. Alarm Set/Off
4. Sleep
5. Snooze button
6. Hour
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION : THE CLOCK RADIO MUST NOT BE USED IN ANY ENVIRONMENT
WHERE IT MAY BE SUBJECT TO THE DRIPPING OR SPLASHING OR WATER
OR OTHER LIQUIDS.
DO NOT CONNECT THE ANTENNA WIRE ON THE BACK OF THIS SET TO ANY
OUTDOOR ANTENNA
Mains plug is used as the disconnect device. It shall remain readily
operable and should not be obstructed during intended used. To
be completely disconnected the apparatus from supply mains, the
mains plug of the apparatus shall be disconnected from the mains
socket outlet completely.
BOTTOM OF SET : Battery compartment for 9 volt (6LR61) battery
(not included) for temporary time storage.
ELECTRONIC CLOCK OPERATION
1. Plug the AC line cord into 230V AC home outlet
2. The set is now working as an electronic clock and it will flash
the clock figures to show you it is not set correctly.
3. To set the correct time, depress the Time Set Button (2) and
Hour Button (6) simultaneously, release the buttons
approximately before the correct time is reached. Now depress
the Minute Button (7) and the
simultaneously, to set the readout to the correct time precisely.

RADIO OPERATION

1. Slide the ON/OFF/AUTO Switch (1) to "ON" position.
2. Slide Band Switch (9) to FM or AM position.
3. Turn the Volume Control (8) to desired volume.
4. Turn the Tuning Control (10) to select your favorite station.
5. Antenna
For AM reception, this radio incorporates a highly sensitive ferrite
core bar antenna.
For FM reception, this set is specially equipped with an external
wire as FM antenna. Be sure to untwist it to its fullest length for
peak performance.
2
2
AM/FM ALARM CLOCK
2
6
3
7
4
5
10
7. Minute
8. Volume Control / Buzzer
9. Band Switch
10. Tuning Control
11. AUTO indicator
12. HI-LO Dimmer
Time Set Button
WAKE TO RADIO
Having selected your station and set the volume at the desired
level, proceed as follows :
1. Slide the ON/OFF/AUTO Switch (1) to "AUTO" position.
2. Press the Alarm Set Button (3) and whilst this button is
depressed, press the Hour Button (6) and then the Minute Button
(7) until the time is reached at which you wish to wake. The wake
up time is now entered into the timer memory. To check the wake
8
up time, simply press the Alarm Set Button (3) and the clock will
9
show the present time. The preset wake up time will continue
to be registered in the time memory and the radio will switch on
10
by itself at the same time the next day. To switch the radio off,
simply press the Alarm Off Button (3).
When wake to radio is set, but want to listen radio before alarm
time set. Press SLEEP button (4) once will turn radio on and
press SNOOZE button (5) once will turn radio off.
WAKE TO BUZZER
Set the controls as for "Wake to Radio" but volume control (8) to
BUZZER position. The buzzer can then be switched off by pressing
the Alarm Off Button (3) or it can be converted to the radio by
selecting switch (1) to "ON" position.
SLEEP TO RADIO
The radio can be set to play and to switch off automatically for a
length of time from 1 minute to 1 hour 59 minutes by following this
procedure - With all the controls preset in the "Wake to Radio"
positions, depress the Sleep Button (4) and press the Minute
Button (7) to count down to the desired sleep time. To switch off
the radio before the end of the registered sleep time period, simply
press the Snooze Button (5).
SNOOZE CONTROL
The Snooze Button (5) allows the user an extra sleep time of about
9 minutes after radio alarm is switched on at the preset wake up
time.
SPECIFICATION
Power Source .......................... : 230V ~ 50Hz
DC battery ............................... : 9V (1 x 9V 6LR61 Not included)
Radio Frequency ...................... : AM 530-1600kHz:
Power Consumption ................. : 5W
(2)
Precautions for correct disposal of the product.
The symbol shown on the equipment indicates that waste must
be disposed of in "separate collection" and so the product must not
be disposed of together with urban waste.
The user must take the product to special "separate waste
collection centres" provided by local government, or deliver it to
the retailer against the purchase of a new product.
Separate collection of waste and subsequent treatment, recycling
and disposal operations promotes the production of equipment
with recycled materials and limits negative effects on the
environment and on health caused by improper handling of waste.
Illegal disposal of the product leads to the enforcement of
administrative penalties.
ENGLISH
: FM 88-108MHz