Before You Begin - Oregon Scientific BAR913 Manual De Uso

D3. °C/°F SLIDE S WITCH
Selects between Centigrade (°C) and Fahrenheit (°F)
D4. CHANNEL SLIDE SWITCH
Designates the remote sensor Channel 1, Channel 2 or
Channel 3
D5. RESET BUTTON
Returns all settings to default values
D6. BATTERY COMPARTMENT
Accommodates two UM-4 "AAA" size batteries
D7. BATTERY DOOR
D8. WALL-MOUNT HOLDER
Supports the remote unit in wall-mounting
D9. REMOV ABLE TABLE STAND
For standing the remote unit on a flat surface

BEFORE YOU BEGIN

For best operation:
1. Insert batteries for the remote unit first. Then proceed with
inserting the batteries for the main unit.
2. Position the remote unit and the main unit within effective
transmission range. In usual circumstances, the effective range
is 30 meters.
3. Though the remote unit is weather proof, it should be placed
away form direct sunlight, rain or snow.
BATTERY INSTALLATION:
REMOTE UNIT
The remote unit uses two (2) UM-4 or "AAA" size batteries.
Installation:
1. Remove the outer battery compartment door.
2. Remove inner screws and open the inner clear plastic
compartment door.
3. Select the channel number on the CHANNEL slide switch.
4. Select the temperature display unit on the °C/°F slide switch.
5. Insert the batteries strictly according to the polarities shown.
6. Replace the battery compartment door and secure its screws.
BATTERY INSTALLATION: MAIN UNIT
1. Gently lift the tab on the battery compartment door.
2. Insert four UM-3 or "AA" size alkaline batteries.
4