Safety Instructions; Electrical Safety - ELEM Technic SUPERJET1401LT Manual De Instrucciones

GB
WARNING
Read this manual carefully before using the
machine, for your own safety.

SAFETY INSTRUCTIONS

When using the machine, always observe the
enclosed safety instructions as well as the
additional safety instructions.
ADDITIONAL SAFETY INSTRUCTIONS FOR
HIGH-PRESSURE CLEANERS
H igh-pressure cleaners must not be used by

children or untrained persons.
A ttention: when switching on the machine it

kicks back by the force of outgoing water.
N ever use the machine near human beings,

unless they are wearing protective clothing.
N ever point the water jet to yourself or others

to clean clothing or footwear.
Never point the water jet to the machine itself.
Never point the water jet to electrical wiring or
power outlets because of risk of electric shock.
I f you use an extension cord, it must be of a

watertight construction.
Warning: using the wrong type of extension
cord can be dangerous!
Warning: high-pressure hoses, couplings, etc.
are important for the safety of the machine.
Only use high-pressure hoses, couplings, etc.
which are recommended by the manufacturer.
K eep the high-pressure hose connected to the

machine as long as the system is under
pressure. Disconnecting the highpressure hose
while the system is under pressure is
dangerous.
D o not use acids or flammable liquids in the

machine. Only use detergents with ph-value of
6-8.
N ever use the machine if the connecting line,

safety provisions or other important parts have
been damaged.
O nly use spare parts from the manufacturer or

which have been approved by the
manufacturer.
A lways remove the plug from the socket

before carrying out any maintenance.

ELECTRICAL SAFETY

Always check that the power supply
corresponds to the voltage on the rating plate.
DESCRIPTION (fig. A)
Your high-pressure cleaner has been designed
for outdoors cleaning of stone, wood, metal and
plastic materials.
1 On/off switch
2 Wheels
3 High-pressure hose
4 Connection for high-pressure hose
5 Handle
6 Pistol grip
7 Trigger
8 Safety catch
9 Connection for water supply
10 Lance "TURBO"
11 Soap holder
12 Filter
Mounting the lance (fig. B)
C onnect both parts of the lance by fitting the

bayonet on the nozzle in the joint of the pistol.
Before mounting or removing the lance, always
remove the plug from the wall socket first.
Mounting the soap holder (fig. C)
F asten the bayonet on the soap holder (11) in

the joint of the pistol.
F asten the bayonet on the nozzle in the joint

of the soap holder.
Connecting the high-pressure hose (fig. D)
S crew the coupling nut to the high-pressure

hose on connection (4). Tighten the coupling
nut firmly.
Connecting to the water supply (fig. D)
C onnect a garden hose which has been

connected to the water mains directly or via a
reducing nipple to the connection (9).
Instructions for use
F ully open the tap of the water mains before

switching on the machine.
H old the trigger of the pistol grip until all air is

released from the hose.
A s soon as water starts flowing out of the

nozzle, release the trigger and switch on the
machine.
10