Intended Use; Non-Intended Use; Technical Data; Transport - WELDY foiler Instrucciones De Funcionamiento

1.1 Intended use

The foiler / foiler ETL is designed for lap welding of tarpaulins and billboards in professional applications.
Only genuine Weldy spare parts and accessories may be used. Failure to use such spare parts and accessories will
invalidate the warranty and guarantee.
Welding processes and types of material
• Overlap welding of thermoplastic sealing sheets (PVC, PP, PE, ECB, EVA, FPO, PIB, PMI, PO, TPO)
• Welding width 20 and 30 mm

1.2 Non-intended use

Any use other than or beyond that described above is deemed unintended.

2. Technical data

We reserve the right to make technical changes.
Nominal voltage
Nominal output
Frequency
Temperature
Speed
Emission level
Dimensions (L × W × H)
Weight (w/o additional weight)
Mark of conformity
Protection Class I

3. Transport

The hot-air blower (4) MUST be allowed to cool down prior to transport.
Never use the carrying handle (20) on the device or the transport box for transport with a crane.
18
V~
W
Hz
°C 80 – 530
m/min.
L (dB)
pA
mm
kg
foiler
230
2100
50 / 60
1.0 – 7.5
67
445 × 276 × 280
10.8
foiler ETL
1700
80 – 530