Hamilton Beach 14340 Manual Del Usuario página 4

840131600 ENv01.qxd 2/4/05
Sensor Control
RED Light
Solid Power OFF ( O )
Blinking Iron was heating/reheating and went to
OFF ( O ). Iron will reheat when moved.
GREEN Light
Iron is heated and ready for ironing.
Solid
Blinking Iron is preheating/heating.
To Dry Iron
1. Plug in iron.
2. Turn Adjustable Steam to the Dry Iron position.
3. Set Temperature Selector to desired temperature. With iron
in an upright position, allow 3 minutes for iron to reach
desired temperature. Do not preheat iron with soleplate
facing down.
4. To turn iron off, set Temperature Control to OFF ( O ). The
iron may be turned off by pressing the Temperature Setting
Button for 3 seconds.
To Steam Iron
1. Unplug iron. Open water tank fill cover. Using a cup, slowly
pour 6 ounces ( 3 ⁄ cup) of tap water into the water tank
4
opening. Close water tank fill cover.
2. Plug in iron.
3. Set Temperature Selector to desired setting in steam
range. With iron in an upright position, allow 3 minutes for
iron to reach desired temperature. Do not preheat iron with
soleplate facing down.
10:14 AM Page 6
6
4. Set Adjustable Steam to desired steam output.
5. To turn iron off, turn Adjustable Steam to Dry Iron.
Set Temperature Control to OFF ( O ). The iron may be
turned off by pressing the Temperature Setting Button for 3
seconds.
6. Empty water from the iron following directions in "Caring
for Your Iron and Soleplate."
Water
Please use ordinary tap water. If you have extremely hard
water, alternate between tap water and distilled water for
use in the iron.
Features
(on selected models)
Adjustable Steam
Provides minimum steam for wool or
maximum steam for linen. Set the dial
to to change to Dry Iron.
Blast of Steam and Spray Buttons
Push Steam Button for an extra blast of
steam. Push Spray Button to release a
fine spray of water for difficult wrinkles
in cotton or linen.
Steam Spray
7