Parts And Features; Operating Your Toaster - Kenmore KKTS4SB Manual Del Usuario

PARTS AND FEATURES

Fig. 1
Cool-Touch
Exterior/
Wipe-Clean
Finish
Toast Control Levers
NOTE: Toaster must
be plugged in for
lever to operate
Cord Storage
under base
Hinged Crumb Trays
accessible from bottom
Fig. 1a
Extra-Wide Slots
Self-Adjusting
Bread Guides
Toast Shade
Selectors
4

OPERATING YOUR TOASTER

IMPORTANT
During the rst few minutes of initial use, you may notice smoke and/or a slight odor. This is
normal and should quickly disappear. It will not recur after appliance has been used a few more
times.
1. Place toaster on a dry, level, stable surface.
2. Plug power cord into a standard 120-V, 60 Hz AC-only polarized electrical outlet.
3. Adjust the Toast Shade Selector to the desired setting. Turn the selector left toward 1 for lighter
toast or right toward 6 for darker toast. For the rst time you toast, set the selector midway to 3,
and adjust as desired for future toasting. There are two Toast Shade Selectors, one for each side of
the toaster.
4. Place bread slices or other item to be toasted in the slots and press down the Toast Control
Lever until it clicks. The Self-Adjusting Bread Guides will automatically adjust to hold the food in
place. There are two Toast Control Levers, one for each side of the toaster. There are two di erent
Cancel buttons, one for each side of the toaster.
5. When toasting is done, the Toast Control Lever will automatically pop up and toast can be
removed from toaster.
CAUTION: If food becomes jammed or wedged in the toaster, the built-in
Auto Power-O function will automatically shut the power o .
UNPLUG the cord and move the Toast Control Lever up and down a few
times to raise the jammed food item. NEVER use metal utensils to free food.
NOTE
NEVER clean the crumb tray unless the toaster is completely cool.
5