MIMSAL LUXIFLEX HAL Instrucciones página 3

LUXIFLEX HAL - Instructions
LUXIFLEX HALOGEN
The design of the light fixture is highly versatile. It is suitable for medical examination and has
many features that makes it ideal for use in medical centres and veterinary clinics.
The optimum working distance between the light bulb and the object being lit up is 50 cm.
1. Installation
- Requires a MIMSAL mount, which is installed before the lamp is placed in position.
- A table clamp mount is supplied and wall or ceiling mounts or a rotating base can be
supplied as optional accessories.
- MIMSAL cannot guarantee the life and functionality of the product where third party
accessories are used.
2. Caution
- Always disconnect the lamp from the power supply when cleaning or carrying out
maintenance work.
- Clean either dry or using a weak solution of normal soap and water. Avoid using alcohol,
acids or any type of organic solvent.
- Do not leave on for longer than 8 hours at a time.
3. Troubleshooting and maintenance
- Maintenance: Only for qualified electrical engineers or other qualified personnel.
- To change the bulb:
- Always disconnect the lamp from the power.
- Remove the ring cover from the lampshade (image 1 and 2).
- Remove the bulb and replace the new bulb.
- Replace the ring cover (image 2 and 1).
Notify by the user / patient to MIMSAL and the competent authority of the country, any
serious incident that occurs in relation to the use of the equipment
MIMSAL only accepts responsibility for maintenance, repair or changes carried out
by MIMSAL staff using original MIMSAL parts.
The manufacturer reserves the right to change the characteristics of its products
without prior notice.
Light bulb
Useful life
Lux at 50 cm
Colour temperature
Colour Rendering Index
Electrical Protection Class
Total Length
Color
Protective glass
Power
Frequency
ENGLISH
cod. I0104AO
LUXIFLEX HALOGEN
Hal. Masterline ES 35W 8º
5.000 h
50.000 lux
4.000º K
Class II
Borosilicate
220/230V
50/60 Hz
95%
85 cm
White