Nd Zone-Offset; Alarm Setting Mode - Oregon Scientific AWS899 Manual De Instrucciones

TIME Set hour and minute
YY-MM-DD Set Year, Month and Date
FORMAT Set 12 or 24 hour format and
ANALOG, DIGITAL or CLASSIC
clock display format
RF CLOCK Set auto synchronization ON or OFF
nd
2 ZONE- nd
Set 2
OFFSET
EXIT Return to previous page
TIP Press HOME to return to Main Menu.
nd
2 ZONE-OFFSET
You can offset current local time to correspond with
the time from another region (2
For example, if the current local time is 1:30pm and
the time in another region is 3:30pm, you should adjust
the 2 nd ZONE-OFFSET to +02 to compensate.

ALARM SETTING MODE

When activated, the crescendo alarm will sound until
it shuts off at two minutes.The unit is equipped with 2
alarms (alarm 1 and alarm 2) that can be individually
set to go off daily, or every weekday (ie Monday to
Friday only).
zone-time
nd zone).
1. From the Main Menu, access the SETTINGS Mode.
Press UP / DOWN to
select ALARM Setting
Mode then press
ENTER.
2. Choose the settings that you want to adjust and
edit as shown in the Changing Settings section.
ALARM 1 Set alarm ON / OFF, hour, minute
and daily / weekday alarm type
ALARM 2 Set alarm ON / OFF, hour, minute
and daily / weekday alarm type
EXIT Return to previous page
A will indicate that an alarm is active.
11