Key-Lock Function - Oregon Scientific RM323A Manual Del Usuario

THE RESET BUTTON
The [RESET] button is used to enhance synchronization of
signals after battery replacement or when the unit is operating
in an unfavourable way or malfunctioning. Use a blunt stylus
to hold down the button. All settings will return to their default
values.

KEY-LOCK FUNCTION

To lock all key-operation when carrying this clock with you,
slide the [KEY-LOCK] switch to the right. To operate this clock
again, slide the switch to the opposite direction.
TABLE-STANDING
This unit is designed specially to facilitate table-standing.
MAINTENANCE
When handled properly, this unit is engineered to give you
years of satisfactory service. Here are a few product care
instructions:
1. Do not immerse the unit in water. If the unit comes in
contact with water, dry it immediately with a soft lint-free
cloth.
2. Do not clean the unit with alcohol containing detergent,
abrasive or corrosive materials. Abrasive cleaning agents
may scratch the plastic parts and corrode the electronic
circuit.
3. Do not subject the unit to excessive: force, shock, dust,
temperature, or humidity. Such treatment may result in
malfunction, a shorter electronic life span, damaged
batteries, or distorted parts.
4. Do not tamper with the unit's internal components. Doing
so will terminate the unit's warranty and may cause
damage. The unit contains no user-serviceable parts.
5. Only use new batteries as specified in this instruction
manual. Do not mix new and old batteries as the old
batteries may leak.
6. Read this instruction manual thoroughly before operating
the unit.
11