Operation - BE Power Equipment 15" WHIRL-A-WAY Manual Del Operador

Never reach under the unit while the high-pressure cleaner is operating
• Never direct the 15" Whirl-A-Way surface cleaner at humans or animals.
• Do not operate on a ladder.
Nozzle has been set according to factory set alignment. Do not adjust.
During operation, should you experience a buildup of small stones
or other foreign material within the cover, we recommend that you
simply tip the cleaner on its side at 45° which should expel any foreign
materials. This will extend the life of your tips and rotary arm. The tips
that have been installed on your surface cleaning system permit the
use of your cleaner with a pressure washer producing up to 3.5 GPM
at 3,500 PSI. This unit will not spin efficiently with flow under 1.4
GPM. Periodically check the tips to ensure they are not plugged by
dirt particles. It is very important when operating your 15" Whirl-A-Way
surface cleaner, that you maintain a continuous motion.
Should you leave the cleaner in a stationary position, the surface being
cleaned can be seriously damaged by the high pressure.
Use with a gun and lance
Connect to lance using q/c fittings on the lance and 15" Whirl-A-Way
surface cleaner.
Attach to long wand
Attach to a long-wand for cleaning hard-to-reach surfaces. Connect to
long-wand using the quick connect fittings on the long-wand and
15" Whirl-A-Way surface cleaner.
6
WARNING

operation