Clock Settings; Alarm; Weather Forecast - Oregon Scientific BAR383HG Manual De Usuario

CLOCK SETTINGS

You only need to do this if you have disabled the clock
radio reception, or if you are too far from the radio
signal.
To set the clock:
1. Press MODE / SNOOZE to select Clock display
area and rotate MODE / SNOOZE to navigate to a
clock display mode.
2. Press and hold MODE / SNOOZE for 2 seconds.
3. Rotate MODE / SNOOZE to adjust the setting.
4. Press MODE / SNOOZE to confirm and move to the
next setting,
5. The settings order is: time offset, 12 / 24 hr format,
hour, minute, year, month / day format, month, day
and language.
NOTE If you enter + 1 in the time offset setting, this will
give you your local time plus one hour. If you are in the
US (BAR383HGA only) set the clock to:
0 for Pacific time +1 for Mountain time
+2 for Central time +3 for Eastern time
NOTE The language options are: English (E), French
(F), German (G), Italian (I) and Spanish (S).

ALARM

To set the alarm:
1. Press MODE / SNOOZE to select Clock display
area and rotate MODE / SNOOZE to navigate to
Alarm display mode.
2. Press and hold MODE / SNOOZE for 2 seconds.
3. Rotate MODE / SNOOZE to select the hour and
press MODE / SNOOZE to confirm.
4. Rotate MODE / SNOOZE to select the minute and
press MODE / SNOOZE to confirm.
alarm is ON.
To toggle alarms ON / OFF:
•
Press MEMORY /
is ON.
To silence the alarm:
•
Press MODE / SNOOZE to silence the alarm for 8
minutes. Press MEMORY /
during the 8-minute snooze time.
OR
•
Rotate MODE / SNOOZE or press any other key to
stop the alarm and reset it to activate at the same
time the next day.

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of
weather within a 30-50 km (19-31 mile) radius based on
barometric pressure trend readings.
7
will appear.
indicates
ON / OFF. indicates alarm
ON / OFF to turn it off