After-Sales / Service; Guarantee - AL-KO EKS 2000/35 Manual De Instrucciones

After-Sales / Service

Type
■
Pitch
■
Driving link width
Maximum chain speed
Chain brake
Weight of chain saw:
■
Weight with guide rail and saw chain
■
Weight without guide rail and saw chain
Sound pressure level LpA
Sound power level LwA (2000/14/EC)
Max. vibration acceleration avhw*
* Notes on the vibration value:
■
The vibration emission value given has been
measured according to a standardised test
method and can be used to compare one
power tool with another.
■
The vibration emission value can also be
used for an initial assessment of the expo-
sure (vibration exposure degree).
■
The vibration emission value may differ from
the given value during actual use of the pow-
er tool, depending on how the power tool is
used.
■
Try to keep the vibration load as low as pos-
sible. Exemplary measures to reduce vibra-

15 GUARANTEE

We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warran-
ty period is determined by the legislation of the country in which the appliance was purchased.
Our warranty promise applies only if:
■
These operating instructions are heeded
■
The appliance is handled correctly
■
Original spare parts have been used
The guarantee excludes:
■
Paint damage that can be attributed to normal wear and tear
■
Wear parts that are marked with a frame
The guarantee period commences with purchase by the first end user. The date on the proof of pur-
chase is decisive. In the event of a guarantee claim, please take this guarantee declaration and the
original proof of purchase, and contact your dealer or the nearest authorised customer service centre.
This statement does not affect the purchaser's statutory claims for defects against the vendor.
440105_f
EKS 2000/35
3/8"
1.27 mm
13.5 m/s
Yes
5.8 kg
4.9 kg
96 dB(A)
110 dB(A)
2
5.049 m/s ,
2
K = 3.0 m/s
tion are the wearing of gloves when using the
tool and the limitation of working time. All
parts of the operating cycle must be taken in-
to account (e.g. times when the power tool is
switched off and those in which it is switched
on but runs without load).
14 AFTER-SALES / SERVICE
In the event of questions of warranty, repair or
spare parts, please contact your nearest AL-
KO Service Centre. These can be found on the
Internet at:
www.al-ko.com/service-contacts
The warranty becomes void in the case of:
■
Unauthorised repair attempts
■
Unauthorised technical modifications
■
Non-intended use
xxxxxx (x) on the spare parts card
EKS 2400/40 EKI 2200/40
3/8"
1.27 mm 1.27 mm
13.5 m/s 13.5 m/s
Yes
6.0 kg
5.2 kg
95 dB(A) 94 dB(A)
110 dB(A) 108 dB(A)
2
5.945 m/s , 5.061 m/s
2
K = 3.0 m/s K = 3.0 m/s
3/8"
Yes
6.0 kg
5.2 kg
2
,
2
49