HEPRO SØSTERHJELP Manual De Instrucciones página 10

Assembling the
TRAPEZE BAR
Art. No. 35148
A
Unwrap the received parts and make sure nothing
is missing.
It should consist of:
- One pole (trapeze bar tube)
A 1
- Two universal connectors
A 2
B
The universal connector is disassembled, into six
parts.
C
Attach the universal connector
pole. This is done by attaching the largest clamp
to the pole and then threading part
attaching the remaining parts
Angle part so that the accessories fit.
B 4
Find the desired height and tighten so that the
universal connector holds, but loosely enough that
the accessories can be threaded on as described
in the next step.
10
to the Gripo
A 2
B 2
through, and
B 1
to .
B 3 B 6
A 1
B 6 B 5 B 4 B 3
A 2
B 2 B 1