VonHaus 2500259 Manual Del Usuario página 3

EN
Please read all instructions carefully before use and retain for
future reference.
INTENDED USE Only operate the power tool/machine for
its intended purpose and within the parameters specified in
this manual.
This power tool/machine is for domestic use only. Do not use
outdoors or on wet surfaces.
This power tool/machine is not intended for use by persons
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless supervised or given
appropriate instruction concerning the product's use by a
person responsible for their safety.
GENERAL PRECAUTION Do not allow to be used as a toy.
Children should be supervised to ensure they do not play
with the power tool/machine.
If the power tool/machine is not functioning properly,
has been dropped, damaged, left outdoors, or immersed
in liquid, do not use, contact DOMU Brands Customer
Services.
Do not use the power tool/machine if any parts appear to be
faulty, missing or damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY Avoid body contact with
earthed or grounded surfaces such as pipes,radiators,
ranges and refrigerators. There is an increased risk of electric
shock if your
body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the
off position before connecting to the power source and/ or
battery pack, picking up or carrying the tool. Carrying power
tools with your finger on the switch, or energising power
tools that are switched on, invites accidents.
Do not operate power tools in explosive atmospheres such
as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or
fumes.
Always wear eye protection. Any power tool can throw
foreign objects into your eyes and cause permanent eye
damage. Always wear safety goggles (not glasses) that
comply with ANSI safety standard Z87.1. Every day glasses
have only impact resistant lenses.
Do not expose power tools to rain or wet conditions. Water
entering the power tools will increase the risk of electric
shock.
Stay alert, watch what you are doing and use common sense
when operating a power tool/machine. Do not use a power
tool/machine while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while
operating power tool/machine may result in serious personal
injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tool/machine with your finger on the switch
or energizing power tool/machine that have the switch on
invites accidents.
Remove any adjusting key or spanner before turning the
power tool/machine on. A spanner or a key left attached
to a rotating part of the power tool/machine may result in
personal injury.
Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool/machine
A5P | 01
in unexpected situations.
Dress appropriately. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving
parts.
If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related
hazards.
WORK AREA SAFETY Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tool/machine in explosive
atmospheres, such as in the presence of flammable liquids,
gases or dust.
Power tool/machine create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a power
tool/machine. Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE Do not force the
power tool/machine. Use the correct power tool/machine for
your application. The correct power tool/machine will do the
job better and safer at the rate for which it was designed.
Do not use the power tool/machine if the switch does not
turn it on and off. Any power tool/machine that cannot
be controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool/machine before making any
adjustments, changing accessories, or storing power tool/
machine tools. Such preventive safety measures reduce the
risk of starting the power tool/machine accidentally.
Store idle power tool/machine out of the reach of children
and do not allow persons unfamiliar with the power tool/
machine or these instructions to operate the power tool/
machine.
Power tool/machines are dangerous in the hands of
untrained users.
Maintain power tool/machines. Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may affect the power tool/machines operation.
If damaged, have the power tool/machines repaired before
use. Many accidents are caused by poorly maintained power
tool/machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Use the power tool/machine accessories and tool bits in
accordance with these instructions, take into account the
working conditions and the work to be performed.
Use of the power tool/machine for operations different from
those intended could result in a hazardous situation.
CLEANING & MAINTENANCE Never soak or immerse
electrical components and or a component that has a plug
attached.
Disconnect the battery from the power before making
any adjustments, changing accessories, or storing. Such
preventive safety measures reduce the risk of starting the
power tool accidentally.
Ensure the motor has fully stopped before cleaning, clearing
a blockage, checking, or carrying out any maintenance on
the tool.
Maintain your power tool. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If damaged, have
the power tool repaired by a qualified repair person before
use. Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Regularly check external nuts and fixings to ensure vibration
caused by normal use has not begun to loosen them.
Store idle power tools out of reach of children and do
not allow persons unfamiliar with the power tool or these